background image

MODEL No.: XG-KF2000, PRODUCT No.: 700096

6

d) 

Store idle products out of the reach of children and do not allow 

persons unfamiliar with the product or these instructions to operate 

the product. 

Generators are dangerous in the hands of untrained users.

e) 

Maintain products with care. 

Check for misalignment or binding of 

moving parts, breakage of parts and any other condition that may affect 

the product’s operation. If damaged, have the power tool repaired before 

use. Many accidents are caused by poorly maintained products.

f) 

Keep cutting tools sharp and clean.

 Properly maintained cutting tools 

with sharp cutting edges are less likely to bind and are easier to control.

g) 

Use the product, accessories and tool bits etc. in accordance with 

these instructions, taking into account the working conditions and 

the work to be performed. 

Use of the product for operations different 

from those intended could result in a hazardous situation.

Additional Safety Rules for Petrol Products

Additional safety rules for Generators

•  The generator is supplied with lifting handles on each side of the  gener-

tor, and when lifting, two operators should lift the generator together.

•  The generator can also be fitted with wheels, and if these are fitted, the 

generator can be moved with the additional front lifting handle by one 

person.

•  DO NOT OPERATE IN A HAZARDOUS LOCATION. SUCH AREAS INCLUDE 

WHERE THERE IS A RISK OF EXPLOSION OF PETROL FUMES, LEAKING 

GAS OR EXPLOSIVE DUST.

•  DO NOT OPERATE IN A CONFINED AREA. EXHAUST GASES, SMOKE OR 

FUMES COULD REACH DANGEROUS CONCENTRATIONS.

•  THE OUTPUT OF THIS GENERATOR IS POTENTIALLY LETHAL. THE GENER-

ATOR SHOULD NOT BE CONNECTED TO A FIXED EALECTRICAL INSTAL-

LATION EXCEPT BY AN APPROPRIATELY LICENSED PERSON.

•  Protect your generator. This generator is NOT WEATHERPROOF and 

should not be exposed to direct sunlight, high ambient temperature 

and damp, wet or high humidity conditions.

•  Do not smoke while refuelling. This is potentially dangerous as it may 

ignite the fuel and cause an explosion.

Summary of Contents for 700069









































Reviews: