ALDI 700069 Page 32 User Manual Download

Page: 32 / 40

Digital Inverter Generator with Pure Sine Wave

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL: №. XG-KF2000 • 03/2020 • 700069

(toll free)

AFTER SALES SUPPORT

(toll free)

e-mail: [email protected]

1300 889 028

Digital Inverter Generator with Pure Sine Wave

MODEL: №. XG-KF2000 • 03/2020 • 700069

Warranty

Cleaning

1. Keep your machine clean. The outside of the machine can be cleaned

using a damp soft cloth with a mild detergent if required. Never use

water to clean the generator as it may cause damage to internal parts.

2. Some maintenance products and solvents may damage the plastic

parts; these include products containing benzene, trichloroethylene,

chloride and ammonia.

3. Use a vacuum to clean air inlet and outlet louvres of the alternator.
4. Take special care to keep the ventilation inlets/outlets free from

obstruction; cleaning with a soft brush followed by a compressed air jet

will usually be sufficient to ensure acceptable internal cleanliness.

5. Wear eye protection when carrying out cleaning.

Your new FERREX® Inverter Generator will more than satisfy your

expectations.
It has been manufactured under stringent FERREX ® Quality Standards to

meet superior performance criteria.
You will find your new Inverter Generator easy and safe to operate, and, with

proper care, it will give you many years of dependable service.

CAUTION.

Carefully read through this entire instruction manual before

using your new FERREX ® Inverter Generator.
Take special care to heed the Cautions and Warnings.
Your FERREX ® Inverter Generator has many features that will make your job

faster and easier. Safety, performance, and dependability have been given

top priority in the development of this Generator, making it easy to maintain

and operate.
Use only FERREX ® replacement parts for your product.
Non-conforming parts or modifications made to parts will void your

warranty.

• When carrying the generator, ensure 2 people carry due to the weight of

the unit. Do not carry the unit tilted or an angle. Ensure the unit is level.

Turn off the fuel tap as a safety precaution.

Summary of Contents for 700069









































Search results

Summary of Contents for 700069

Reviews:

Related manuals for 700069

Brands by name

Popular brands

ALDI 700069, User Manual

Search results

Summary of Contents for 700069

Reviews:

Related manuals for 700069

Brands by name

Popular brands