ALD-07637
18
IMPORTANT INFORMATION CONCERNING SIKA’S PRODUCTS :
Sikaflex
®
-512 Caravan is a single component hybrid sealant PU based on silane-terminated polymers. It cures
on exposure to atmospheric moisture to form a durable elastomer. Sikaflex
®
-512 Caravan is manufactured
in accordance with quality assurance rules ISO 9001 and 14001 and the «Responsible Care» program.
Expiration date are indicated as following: month/year. Example : 03/09 corresponds to March of the year
2009.
Warning: May cause sensitization by inhalation. Do not breathe gas/fumes/vapour/spray. In case of accident
or if you feel unwell, seek medical advice immediatly (show this document where possible).
Warning: ALDEN SAS Services declines all responsability if these instructions are not respected.
Carefull: During the drying time, the vehicle must stay parked once you have glued the unit.
Attention:
• Only the supplied gluing kit answers the ALDEN SAS Services security requirements.
• Inform the customer of the dangers in case of strong winds. Only start the vehicle once the unit is
folded down.
• The warranty will become void if these rules are not respected.
Xn
methylenediphenyl diisocyanate
How to glue the panel:
1. Mark the location of the solar fixation parts on the roof before removing the panel.
2. Sand the surface you are going to glue (roof, underneath the solar fixation parts) with sandpaper (medium
grain).
3. Clean each surface with a thinner.
4. Spread Sika-Aktivator on the sanded surface. Leave to dry for 15 to 20 minutes.
5. Spread plenty of glue underneath the solar fixation parts with Sikaflex
®
-512 Caravan then press slightly
on the panel. Layer of glue: ± 3 mm.
6. To accelerate the polymerization, pulverize a little water on the visible parts of the glue. Leave to dry for
24 hours.
How to glue parts using Sikaflex®-512 Caravan and Sika-Aktivator
