AE–1800 Instruction Manual
Typical NAVTEX Message Screen
1. Typical NAVTEX Message Screen
(
continued – 5 /5
)
1 . 2 . I n d i c a ti o n o f R e c e p ti o n an d Sto r a g e o f N ew N AV T E X M e s s ag e
●
Indicating Reception of New Message – First Receiver
The equipment visually indicates the reception of a new NAVTEX message by
attaching a tag (
i
NEW MESSAGE
i
) to the message ID, as in the example below.
The tag will be turned off 24 hours after reception or when you press
.
Figure 1-3 First Receiver Receiving New NAVTEX Message – Example
●
Indicating Reception of New Message – Second Receiver
When the first receiver message screen is currently showing, the reception of a new
message on the second receiver is indicated with message “
2ND RCVR RECEIVED
NEW MSG
” blinking in the prompt line at the screen bottom, as in the example
below. To read it, switch to the second receiver page by pressing
.
Figure 1-4 Indication of New Message Reception on Second Receiver – Example
●
Indicating Successful Storage of New Message
When a new NAVTEX message has been received with a character error rate (
CER
)
of 33% or less, the message will be displayed and stored in non–volatile memory
together with its ID; this condition is displayed with indication “
STORED
” at the
end of the message together with its
CER
reading, as in the example above.
If
the
CER
exceeds 33%, the currently received message will not be stored and will
not be displayed. No
CER
reading will be available.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NNNN
STORED ( CER= 00%)
2 N D R C V R R E C E I V E D N E W M S G
This message blinks
.
NA28
I
NEW MESSAGE
I
C C G D 5 BN W 3 2 8 – 06
NJ – COASTAL – SURFACE AND SUB–SURFACE
DATA BUOY DEPLOYMENT
1. 60 SUBSURFACE AND 2 SURFACE MOORINGS
WILL BE DEPLOYED ON LINES EXTENDING FROM
39–09.6N, 073–22.05W TO 38–55.56N, 072–50.76W
AND OUT TO
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。
NNNN
STORED ( CER= 00%)
Tag indicating reception of new message
Message ID
End–of–message indication
Successful storage indication
Character error readout