AE–1800 Instruction Manual
Customizing Operation via Menu System
4.11.5. Outpu t t i ng NAVTEX Messages of Speci fic Stat ion
If you wish to output all messages received from a specific NAVTEX transmitting
station, carry out the following step–by–step procedure:
NOTE: A forced carriage return (
) will be replaced by an underscore ( _ ) (hex 5F ) when it
is output to an IBS/INS terminal or a printer.
(1) Highlight option “
4: M S G S E L E C T E D BY S TATI O N
” on the
SELECT OUTPUT
MESSAGES
submenu, and then press
. This turns on another submenu with a
list of station IDs, enabling you to select the desired transmitter, as in the example
illustrated below:
Figure 4-21 Outputting Stored Messages Received from Station D – Example
(2) Using
/
, highlight the desired ID, and then press
. The following window
will pop up to indicate the outputting action in progress.
The window will be turned off automatically upon completion of outputting.
To cancel the action, press
.
(3) Press
to return to the previous menu or
to return to the first receiver
message screen.
Select desired station ID with
/
,
and then press
.
6: SELECT OUTPUT MESSAGES
1: RECEIVING MSG
ON
I
OFF
I
2: ALL STORED MSG
3: MSG SELECTED BY FREQUENCY
4: MSG SELECTED BY STATION
i
5: MSG SELECTED BY TYPE
6: DISPLAYED MSG – ALL
7: DISPLAYED MSG – SPECIFIC
4: MSG SELECTED BY STATION
A
B
C
i
D
i
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
OUTPUTTING STORED MESSAGES.
TO CANCEL, PRESS [CLR].
