15
GB
Press the button with the arrow
1.
until the gas heating symbol
flashes. The “ON” text is shown
next to the temperature on the
display.
Switch off the gas heating by
2.
pressing the -/Off button. The
“OFF” text is shown next to the
temperature on the display.
The gas heating symbol goes
3.
out when the panel returns to
standby.
Do as follows to switch off the gas heating.
Heating with electricity
8.
Press the button with the arrow
1.
until the electrical heating sym-
bol flashes. The “OFF” text is
shown next to the temperature
on the display.
Select power (1kW, 2kW or
2.
3kW) with the +/On or -/Off but-
tons. The diagram shows that
3kW power has been selected
(some boilers are only equipped
with 1-2kW).
The electrical heating symbol is
3.
shown when the panel returns to
standby.
To activate heating with electricity. The greater the power the more rapid the heating will be.
Press the button with the arrow
1.
until the electrical heating sym-
bol flashes.
Switch off the electrical heating
2.
by pressing the -/Off button until
all power steps have gone out.
The “OFF” text is shown next to
the temperature on the display.
The electrical heating symbol
3.
goes out when the panel returns
to standby.
Do as follows to switch off heating with electricity.
Circulation pump
9.
This symbol is displayed when the circulation pump is operating (12V-pump or
230V-pump). When heat is needed, the pump starts automatically.
The boiler selects the 230V pump if one is installed in the system. When the
230V is disconnected from the vehicle the 12V pump is automatically selected.
The symbol will light up even if the pump is defective.
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
Heating with gas
7.
Press the button with the arrow
1.
until the gas heating symbol
flashes. The “OFF” text is shown
next to the temperature on the
display.
Select gas heating by pressing
2.
the +/On button. The “ON” text
is shown next to the tempera-
ture on the display.
The gas heating symbol is dis-
3.
played when the panel returns
to standby.
Do as follows to activate heating with gas.
blinkar
flashes
blinkar
flashes