13
GB
In standby, the functions which are activated in the
boiler are shown, and there is no background lighting
in the display. The control panel automatically goes to
standby from the on position after two minutes if no but-
tons are pushed or if you step to standby (left of On/Off)
with the arrow keys.
Start the on position by pressing any button.
The background lighting comes on (blue light) and a
function that can be set flashes. Select a function that
can be set with the arrow keys. The settings are auto-
matically saved.
The standby and on-position of the control panel
1.
The control panel is on standby
1.
and the heater is switched off.
The control panel is on standby
2.
and the heater is operating.
Resetting the system (factory adjustment)
2.
Press the Store/Reset button for
1.
10 seconds. The control panel is
reset to the factory setting.
The main breaker to the control
2.
panel is in the “Off” position,
Gas is on, Electricity at 1kW and
22°C.
The pump is in automatic posi-
tion. The lower menu row is not
lit up.
Start the heater
3.
Press the button with the arrow
1.
until “Off” (main breaker) in the
display flashes.
Press the +/On button.“On”
2.
(main breaker) in the display
flashes.
The settings are ready.“On”
3.
(main breaker) is shown in the
display when the panel returns
to standby.
Start the heating with the last used settings.
If you break the power to the heater, the settings which
were last used will automatically be used when the
power comes back on.
CONTROL PANEL – FUNCTIONS AND SYMBOLS
blinkar
flashes
blinkar
flashes
Please read these instructions carefully before using the boiler. For Operating Instructions and Installation
Instructions of boiler, see separate instruction.
These instructions are approved for The Alde Compact 3010 boiler fitted in vehicles, boats and buildings in accord-
ance with CE no. 0845 BP0003, installation in vehicles e500 00005 and EMC e5 03 261.
Installation and repairs may only be carried out by a professional. National regulations must be adhered to.