14
Switch off the heater
4.
Press the button with the arrow
1.
until “On” (main breaker) in the
display flashes.
Press the -/Off button. “Off”
2.
(main breaker) in the display
flashes.
The settings are ready. “Off”
3.
(main breaker) is shown in the
display when the panel returns
to standby.
blinkar
flashes
blinkar
flashes
Set the desired temperature
5.
Press the button with the arrow
1.
until the symbol for selecting
temperature flashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
Increase the temperature by
2.
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the tempera-
ture at 25.0°C.
The settings are complete and
3.
the boiler is working at the set
temperature.
The temperature can be set from +5°C to 30°C in intervals of 0,5°C.
Warm water
6.
Press the button with the arrow
1.
until the symbol for selecting
warm water flashes. The “OFF”
text is shown next to the tem-
perature on the display.
Switch the warm water on by
2.
pressing the +/ON button.
The “ON” text is shown next to
the temperature on the display.
The warm water symbol is dis-
3.
played when the panel returns
to standby.
If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you
have selected more warm water, the circulation pump
stops.
Press the button with the arrow
1.
until the warm water symbol
flashes. The “ON” text is shown
next to the temperature on the
display.
Switch off the warm water by
2.
pressing the -/Off button.
The “OFF” text is shown next to
the temperature on the display.
The warm water symbol goes
3.
out when the panel returns to
standby.
If you want you can switch off more warm water before 30 minutes have elapsed.
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes