March 20, 2013
• Alcorn McBride RideTraXX User’s Manual • Rev 1.3 • Page 41
Control Commands
These commands control some of the operational modes of the RideTraXX.
Version Request
Description:
This command is used to request the operating system version.
Command Bytes:
?V
Message Response:
RideTraXX x.x.x
Where x.x.x is the current version of the installed firmware.
Example:
Get current version.
?V
Soft Reset
Description:
This command issues a software reset to the unit.
Command Bytes:
XX
Message Response:
R
Example:
Reset Unit.
XX
Set Name
Description:
This command gets/sets the user-readable name of the unit.
Command Bytes:
<n>NM
Parameters:
<
n>
is the desired ASCII name of the unit
Message Response:
R
Comments:
To get the current name of the unit, send
NM
without the
<n>
parameter.
Minimum OS Version:
TraXXOS 1.2.5
Examples:
Set unit name to “myTraXX”.
myTraXXNM
Get the current unit name.
NM
