Page 34
March 20, 2013
• Alcorn McBride RideTraXX User’s Manual • Rev 1.3
Sync Play - SP
Description:
This command causes the RideTraXX to start synchronous playback of
searched files on the specified channel pair or channel group. If no channel
pair or channel group is specified, it will start synchronous playback of all
searched channels. Synchronous playback will begin 3 seconds after the
SP
command is received (+/- 10ms). During the 3 seconds between receipt of
command and start of playback, all audio outputs will be silent.
Command Bytes:
<d> SP
Parameters:
<d>
is either
C
followed by a channel number in ASCII,
P
followed by a
channel pair number in ASCII, or
G
followed by a channel group number in
ASCII
Message Response:
R
Comments:
Channel numbers range from 1 through 16, Channel Pairs from 1 through 8,
and Channel Groups from 1 through 13. Use “*” for All Channels.
Examples:
Sync Play searched files on channel group 2.
G2SP
Sync Play all searched files.
SP
Sync Loop - SL
Description:
This command causes the RideTraXX to start looping synchronous playback of
searched files on the specified channel pair or channel group. If no channel
pair or channel group is specified, it will start looping synchronous playback
of all searched channels. Synchronous playback will begin 3 seconds after
the
SL
command is received (+/- 10ms). During the 3 seconds between
receipt of command and start of playback, all audio outputs will be silent.
Command Bytes:
<d> SL
Parameters:
<d>
is either
C
followed by a channel number in ASCII,
P
followed by a
channel pair number in ASCII, or
G
followed by a channel group number in
ASCII
Message Response:
R
Comments:
Channel numbers range from 1 through 16, Channel Pairs from 1 through 8,
and Channel Groups from 1 through 13. Use “*” for All Channels.
Examples:
Sync Loop searched files on channel group 2.
G2SL
Sync Loop all searched files.
SL
