ALC2 User’s Manual. Rev. 01
19
6. Connections __________________________________________________
Inputs in parallel mode
For inputs in parallel mode, set the upper DIP-switch behind the cover on the front panel to the right hand or ‘ON’ position. Use parallel mode when you want to
drive both channels with one signal, while keeping separate control of both channels’ SDP processing and gain. In parallel mode connect your loudspeakers with
or without SIS to the channel 1 and channel 2 outputs, and your signal source to the channel 1 input. In this mode each channel can have its own SDP module
and uses its own gain control.
