background image

INTRODUCTION                                                                        

Thank you for purchasing our newest Alcom Caller ID phone. This manual is designed to 

familiarize you with this phone. To get the maximum use from your new phone, we suggest that 

you read this instruction manual carefully before using.  

SAFETY INSTRUCTION                                                       

When using your telephone equipment, the following basic safety precautions should always be 

followed to reduce the risk of fire, electric shock and injury to persons: 

1.  Read, understand and follow all warnings and instructions 

2.  Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol 

cleaners. Use a soft damp cloth for cleaning. 

3.  Do not place this product on unstable surfaces. The product may drop, causing serious 

damage to the product. 

4.  Do not overload wall outlets and extension cords as this can result in fire or electric shock. 

5.  Never push foreign objects of any kind into this product through cabinet slots as they may 

affect dangerous voltage points or short circuit parts that could result in fire or electric shock. 

Never spill liquid of any kind on the product. 

6.  Avoid moving or disconnecting this unit during a heavy storm, as there may be a remote risk of 

electric shock from lightning and thunder. 

7.  Unauthorized persons cannot open or service even if there is a defect with the unit. This will 

void the warranty, please send to service center for any defects. 

FEATURES                                                                              

¾

  FSK/DTMF/ETSI compatible with auto-detection  

¾

  16-digit LCD display 

¾

  99 incoming and 18 outgoing number memories 

¾

  1 one-touch and 10 two-touch memories 

¾

  16 kinds of ringing tone for selection 

¾

  3 kinds of hold on music for selection 

¾

  Do Not Disturb function  

¾

  Transfer function between parallel phones (using 2 similar models)  

¾

  Pre-dial and edit function 

¾

  Redial and auto-redial function  

¾

  3-step lock function and 5 sets of alarm clock  

¾

  16 levels of LCD contrast  

¾

  Calculator and key tone function 

¾

  Set PABX code 

¾

  Pulse/Tone dialing mode compatible 

¾

  3 levels of hands free volume for selection 

Summary of Contents for AT5933












Reviews: