Alcom Premium ADT1308, Instruction Manual, Page: 9 / 17

9
1. Press
OK
key to enter missed call lists, received call lists or dialed call lists.
2. The LCD will show the last record. (If no entries are available in the list, the LCD will be shown
EMPTY
).
3. Press
▲
or
▼
key to view other record.
4. When the desired number is shown, press or key to dial out the number automatically.
When the record is shown, press
OK
key, use
▲
or
▼
key to choose. Then press
OK
key to confirm.
1.
ADD TO PB :
this function allows the user to add an entry from the caller list to the phone book.
2.
DELETE :
this function allows the user to delete the currently selected entry from caller list.
3.
DELETE ALL :
this function allows the user to delete all numbers.
Note:
In idle state, press
▲
key once to incoming records or press
▼
key to review outgoing records.
Handset Menu function 3: BS SETTINGS
The user is able to change the base setting in base settings menu, press
OK
key and use
▲
or
▼
key to select
this item. Then you can do as below:
¾ DELETE ONE HANDSET
This function allows the user to delete a handset registration from the base.
1. Press
OK
key, the display will show
DELETE HS
2. Press
OK
key to enter, the user will be prompted to enter the PIN code.
3. Input the correct 4-digit pin code using digit key (default PIN code is 0000). Press
OK
key to confirm.
4. Press
▲
or
▼
key to scroll the handset names/number list up and down.
5. Press
OK
key to confirm. The handset will be deleted from the base, and the display will show
“UNREGISTERED”.
DELETE ALL HANDSETS
1. Press and hold key for 5s,
IN USE/CHARGE
LED will flash,
2. Press key 7 times slowly, the
IN USE/CHARGE
LED flashes quickly.
3. Then
IN USE/CHARGE
LED will OFF and all the handsets would be unregistered from the base.
¾ DIAL MODE
The user can select to change the mode in which the base will dial.
1. Press
OK
key, then using
▲
or
▼
key to select
DIAL MODE
.
2. Press
OK
key to enter.
3. Press
▲
or
▼
key to select the
TONE
or
PULSE
dial mode.
4. Press
OK
key to confirm your selection.
Note: As required by your telephone lines or PABX systems you may need to change the dialing mode
between Tone and Pulse.
¾ FLASH TIME
The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet the telephone line or PABX
requirement.
1. Press
OK
key, then using
▲
or
▼
key to select
FLASH TIME
.
2. Press
OK
key to enter.
3. Press
▲
or
▼
key to select the desired flash time from 100ms, 300ms, 600ms and 1000 ms.
4. Press
OK
key to confirm your selection.
¾ MODIFY PIN