Alcom Premium ADT1308, Instruction Manual, Page: 10 / 17

10
Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000, but
you are able to change to your personal 4-digit PIN.
1. Press
OK
key, then using
▲
or
▼
key to select
MODIFY PIN
.
2. Press
OK
key to confirm, and the display shows
PIN?
3. Enter the existing PIN code for the base and handset by using numerical keys, then press
OK
to confirm.
4. If the old code is validated, the display shows
NEW PIN
, enter a new PIN code (4 digits), press
OK
to
confirm.
5. The display shows
REPEAT
, input the new PIN code again.
6. Press
OK
to confirm, the code will be stored with a confirmation tone.
¾ BASE DEFAULT
This function allows the user to restore the base setting to the factory default.
1. Press
OK
key, then using
▲
or
▼
key to select
BS DEFAULT
.
2. Press
OK
key to confirm.
3. The user will be prompted to enter the PIN code, the display shows
PIN?
, then press numerical keys to
input code (default as 0000).
4. Press
OK
key to confirm. If the PIN code is validated all base settings will be returned to the factory
default.
Handset Menu function 4: HS SETTINGS
The user is able to change a number of the settings for the handset to their own individual preferences.
Press
OK
key and use
▲
or
▼
key to select
HS SETTINGS
. Then you can do as below.
¾ ALARM
The user can set the alarm on the handset and adjust the alarm settings, to give an alert at a programmed time
of every day.
1. Press
OK
key, the first sub-menu is
ALARM
.
2. Press
OK
key to confirm.
3. Press
▲
or
▼
key to select
ON
or
OFF
, selection of
OFF
will turn the alarm off, and the user will be back
to the
ALARM
menu, selection of
ON
option will turn the alarm on , and the user will be requested to set
the alarm time.
4. After selecting
ON
, press
OK
key to start the settings of alarm, “12-00” displayed with “12” is blinking.
5. Press
▲
or
▼
key to change the hours, press
OK
key to confirm, use the same method to select minutes,
AM/PM.
6. After select the alarm time, press
OK
key, the user will be presented with a further option to select to ON
or OFF to enable or disable the snooze function on the alarm by using
▲
or
▼
key.
7. Press
OK
key to confirm your selection.
8. When the alarm is set, the will appear on the top of the display.
Notes:
1. In idle state, the alarm will ring at very sharp time you have set.
2. When alarm rings, you can switch it off by pressing any key of the handset.
When a call comes during the alarm it will be terminated.
3. Re-enter the alarm setting menu option and select
OFF
.