Alcom Premium ADT1308, Instruction Manual, Page: 13 / 17

13
¾ DATE & TIME
The user is able to set the date and time on the handset, by selecting the following option.
1. Press
OK
key. Using
▲
or
▼
key to select
DATE&TIME
,
2. Press
OK
key and the last two digits of the year flashes.
3. Edit the year, month, date and time by pressing
▲
or
▼
key.
4. Press
OK
key to confirm the setting, and return to the
DATE & TIME
menu.
Notes:
1. When the unit is powered on initially, the date and time will be blinking, please to set the date and time first.
2. Date and time will be automatically set when the caller ID message is received in FSK mode.
3. Year must be set manually.
¾ SELECT BASE
The handset can be registered to more than one base (up to a maximum of 4), and you can select which base
you want the handset to operate with.
1. Press
OK
key, then using
▲
or
▼
key to choose
SELECT BASE
.
2.
Press
OK
key and the LCD displays
BASE 1
+
.
(If Base unit is already linked with a Handset it will be shown with “+”).
3. Press
▲
or
▼
to select base (BASE 1~4) or AUTO.
4. Press
OK
to begin searching, if you hear a sound of “di-du-di”, means linked successful.
Note:
If you select “AUTO”, the handset will link with the first of the registered bases that it finds.
¾ HANDSET DEFAULT
This function allows the user to restore the handset setting to the factory default.
1. Press
OK
key, then using
▲
or
▼
key select
HS DEFAULT
.
2. Press
OK
key to confirm.
3. The display shows
PIN?
, then key in the PIN code (default 0000).
4. Press
OK
key to confirm. If the PIN code is validated all handset settings will be returned to the factory
default.
Handset Menu function 5: REGISTRATION
Maximum 5 handsets can be linked to the same base and Maximum 4 bases can be linked to the same
handset by following the procedure below.
1. In standby mode, press
OK
key, then using
▲
or
▼
key select
REGISTRATION
.
2. Press
OK
key to enter. Press
▲
or
▼
key to select BASE from
BASE1
,
BASE2
,
BASE3
or
BASE 4
.
3. Press
OK
key to confirm, LCD displays
PIN?
Then enter the pin code (defaulted as 0000, if input wrong
number, press
R/CLR
to delete).
4. When finished press
OK
key to confirm. LCD display
SEARCHING
, then press and hold key in the
BASE UNIT until you has get
DI-DU- DU-
sound. The handset and base have been registered
successfully.
Notes:
1. If the handset fails to register with the base, it will return to standby mode.
2. You can repeat the above steps to register another handset for the same base, and the successfully