background image

INSTRUCTION MANUAL

9

5.  While blowing you 

will hear a click, DO 

NOT stop blowing, 

continue until the tone 

ends. The handset will 

display Wait... as the 

breath sample is being 

analyzed.

6.  The result of the breath alcohol test 

will be indicated in three ranges with 

messages and actions as outlined below: 

a.  If no alcohol is 

detected, the status 

light will be solid green 

to indicate PASS result 

and the handset will 

display Start Engine

You may start the 

vehicle engine within 

the prescribed time 

period, otherwise the 

handset will revert to 

Ready for Test.

b.  If alcohol is detected 

below the FAIL set 

point, the status light 

will be solid amber 

and the handset will 

display Caution.
You must acknowledge 

that alcohol has been 

detected by pressing 

the bottom navigation 

button before starting 

the vehicle engine.

[This is an optional feature to be set by the 

jurisdiction.]

When the device 

detects the engine 

running, the status 

light will be solid green 

and the handset will 

display Drive Safely

You may now drive the 

vehicle.

c.  If alcohol is detected 

at or above the 

FAIL set point, the 

status light will be 

solid red and the 

handset will display 

Lockout xx:xx (min) 

to indicate the wait 

time before attempting 

another breath test.

You may NOT start the vehicle engine. 

Wait for countdown timer to end and the 

handset to display Ready for Test.

WARNING! Do not attempt another breath 

test until you are certain that your breath 

alcohol concentration is below the FAIL set 

point. A second or subsequent FAIL test result 

will cause another lockout period and may be 

a program violation.

Performing a retest

Additional breath tests are required at random 

time intervals to ensure that the driver has 

not consumed alcohol since the vehicle was 

started.

1.  The status light will be 

flashing green and the 

handset will display 

Retest.
You must provide 

an accepted breath 

sample within the 

prescribed time period.

WARNING! Failure to provide a retest breath 

sample may cause a recall for service and a 

program violation.

2.  Perform the breath test (refer to the 

section Performing a test). 

3.  Observe the message displayed on the 

handset: 

a.  If the status light is 

solid green and the 

handset displays 

Drive Safely, no 

alcohol was detected 

and you may continue 

to drive the vehicle.

Wait…

Start Engine

Cancel

Caution

Start

 

Drive Safely

 

Lockout

xx:xx

 

 

 

 

Retest

 

Drive Safely

Summary of Contents for LR max
















Reviews: