Setting Up a Stacked Configuration
OmniSwitch 6850 Series Chassis and Hardware Components
page 2-64
OmniSwitch 6850/6850E Series Hardware Users Guide
June 2011
5
To provide added resiliency and redundancy,
you must install the redundant stacking cable
to connect
the top switch in the stack to the bottom switch. Connect the redundant cable now. Refer to the diagram
below for more information:
Redundant Connection Between Top and Bottom Switches
6
Once all stacking cable connectors are inserted, tighten the captive screws at the left- and right-hand
sides of each connector as shown.
Be sure not to overtighten the screws.
Tightening Stacking Connector Captive Screws
7
Now that all switches in the stack are connected, continue to
“Booting OmniSwitch 6850 Series
Switches” on page 2-65
.
