Monitoring the Chassis
OmniSwitch 6850/6850E Series Power Supplies
page 4-22
OmniSwitch 6850/6850E Series Hardware Users Guide
June 2011
Checking the Fan Status
To check the current status for all six fans in the chassis, use the
show fan
command. For example:
-> show fan
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
1 4 Running
1 5 Running
1 6 Running
For a complete list of output definitions for this command, refer to the
OmniSwitch CLI Reference Guide
.
Checking the Power Supply Status
For information on checking power supplies, refer to
“Viewing the Power Supply Status” on page 4-20
.
Additional Monitoring Commands
CLI Commands Used for Monitoring a Chassis
show cmm
Displays the basic hardware and status information for primary and
secondary management modules (if applicable).
show ni
Displays the basic hardware and status information for individual mod-
ules. If the switch is a standalone, information for the stand alone
switch displays.
show module
Displays the basic information for individual modules. If the switch is a
standalone, information for the stand-alone switch displays.
show module long
Displays the detailed information for individual modules. If the switch
is a standalone, information for the standalone switch displays.
show module status
Displays the basic status information for individual modules. If the
switch is a standalone, information for the standalone switch displays.
