Switch Fabric Module (SFM)
Adding and Removing SFM Modules
OmniSwitch 8800 Hardware Users Guide
December 2004
page 4-7
Adding a Module
To install an Switch Fabric Module, follow the steps below.
1
Holding the module in both hands, carefully slide it into the chassis card guide. The component side of
the board should face up.
Note.
The module should slide in easily. Do not force the module into the slot. If any resistance is encoun-
tered, ensure the module is aligned properly in the card guide.
AC
OK
DC OK
TEMP
FA
IL
AC
OK
DC OK
TEMP
FAIL
OK1
OK
2
OS8800-SFM
1
5
4
3
2
