Alcatel OmniStack OS-LS-6248, Getting Started Manual

Page: 26 / 60

Introduction
1-10
1
Setting Stacking/Standalone Modes
The OS6200 switch provides Stacking and Standalone working modes. To Set the
required mode by using the Unit push button perform the following procedures:
To work in a stacking mode :
1. Reboot the Alcatel OS6200 switch.
2. Wait until the LED color turns to green.
3. Hold the Unit button until one of the Ethernet port LEDs flashes in Amber. When
flashing, the port LED indicates the unit number to be changed to a Stacking
mode.
4. Press the Unit button with short intervals until the required unit ID is selected.
Releasing the button for more then 10 seconds sets the selected unit to a
stacking mode.
5. To set the device back to a Standalone mode, keep pressing the button with
short intervals until no port LED is flashing (after port 8). Keeping the button
released for more than 10 seconds stets the mode automatically.
Note: When the OS6200 is in stand-alone mode, the "stack" LED is off.If the switch is in
stacking mode, the LED flashes green or amber (green for master, and amber for
backup or slave).
Downloaded from www.Manualslib.com manuals search engine