Alcatel OmniStack OS-LS-6248, Getting Started Manual

Page: 34 / 60

2-18
Installing the Switch
2
Figure 2-6. Power Receptacle
2. Plug the other end of the cable into a grounded, 3-pin socket.
Note: For International use, you may need to change the AC line cord. You must use a
line cord set that has been approved for the receptacle type in your country.
3. Check the front-panel LEDs as the device is powered on to be sure the Power
LED is lit. If not, check that the power cable is correctly plugged in.
4. If you have purchased a Backup Power Supply, connect it to the switch and to
an AC power source now, following the instructions included with the package.
Connecting the BPS to the Switch
1. Insert the power cable plug ( AC/DC) directly into the receptacle located at the
back of the device.
2. Check the front-panel LED as the device is powered on to be sure the Power
LED is lit. If not, check that the power cable is correctly plugged in.
3. Connect the 12V feeding cable to the BPS and to the switch.
Installation Instructions in German
Eine Site Auswählen
Die Schalter können in ein Standard-19-Zoll-Ausrüstungsgestell oder auf eine flache
Ebene montiert werden.
Zum Auswählen eines Standortes beachten Sie bitte die nachstehenden Richtlinien.
• Die Site sollte:
• Sich in der Mitte aller anzuschließenden Geräte sowie in der Nähe einer
Netzsteckdose befinden;
Downloaded from www.Manualslib.com manuals search engine