manualshive.com logo in svg

Alcatel OmniStack OS-LS-6248, Getting Started Manual

Share
Download
Alcatel OmniStack OS-LS-6248 Getting Started Manual Download Page 11

xi

Warnings and Cautionary Messages

Warning:

This product does not contain any serviceable user parts.

Warning:

Installation and removal of the unit must be carried out by qualified 
personnel only.

Warning:

When connecting this device to a power outlet, connect the field ground lead 
on the tri-pole power plug to a valid earth ground line to prevent electrical 
hazards.

Warning:

This switch uses lasers to transmit signals over fiber optic cable. The lasers 
are compliant with the requirements of a Class 1 Laser Product and are 
inherently eye safe in normal operation. However, you should never look 
directly at a transmit port when it is powered on.

Caution:

Do not plug a phone jack connector in the RJ-45 port. This may damage this 
device. Les raccordeurs ne sont pas utilisé pour le système téléphonique!

Caution:

Use only twisted-pair cables with RJ-45 connectors that conform to FCC 
standards.

Caution:

Wear an anti-static wrist strap or take other suitable measures to prevent 
electrostatic discharge when handling this equipment.

Achtung:

Dieses Produkt enthält keine Teile, die eine Wartung vom Benutzer 
benötigen.

Achtung:

Installation und Deinstallation des Gerätes müssen von qualifiziertem 
Servicepersonal durchgeführt werden.

Achtung:

Wenn das Gerät an eine Steckdose angeschlossen wird, muß der 
Masseanschluß am dreipoligen Netzstecker mit Schutzerde verbunden 
werden, um elektrische Gefahren zu vermeiden. 

Achtung:

Dieses Gerät nutzt Laser zur Signalübertragung über Glasfasern. Die Laser 
entsprechen den Anforderungen an eine Lasereinrichtung der Klasse 1 und 
sind durch ihre Bauart im normalen Betrieb sicher für die Augen. Trotzdem 
sollte niemals direkt in den einen Übertragungskanal geblickt werden, wenn 
er eingeschaltet ist.

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for OmniStack OS-LS-6248





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands