background image

 

All-In-One

 

SM

 

 Service Programs: 

 

An Alcatel service agreement brings your company the assurance of 7x24 no-excuses 

technical support. You’ll also receive regular software updates to maintain and maximize your Alcatel product’s features and 
functionality and on-site hardware replacement through our global network of highly qualified service delivery partners. 
Additionally, with 24-hour-a-day access to Alcatel’s Service and Support web page, you’ll be able to view and update any case 
(open or closed) that you have reported to Alcatel’s technical support, open a new case or access helpful release notes, 
technical bulletins, and manuals. For more information on Alcatel’s Service Programs, see our web page at 
www.ind.alcatel.com, call us at 1-800-995-2696, or email us at [email protected].

 

The features and specifications described in this manual are subject to change without notice.

Safety Information:

 

 OmniAccess

 

 

 512 hardware installation and maintenance is to be provided by Customer Support 

personnel, or equivalent, knowledgeable in basic electrical and mechanical safety procedures.

 

Safety Information for Rack Mounting:

 

 Switches should be installed in a maximum 40˚ C environment. To ensure proper air 

flow, it is recommended that the switches have at least two inches of clear space on all sides. To ensure stability, precautions should 
be taken to prevent uneven loading of the rack. Loading of the rack should begin at the bottom. When multiple components are 
installed, precautions should be taken to prevent overloading of power outlets. The switches should always be properly grounded.

 

Lithium Batteries Caution:

 

 There is a danger of explosion if the Lithium battery in your chassis is incorrectly replaced. 

Replace the battery only with the same or equivalent type of battery recommended by the manufacturer. Dispose of used 
batteries according to the manufacturer’s instructions. The manufacturer’s instructions are as follows:

 

Return the module with the Lithium battery to Alcatel. The Lithium battery will 
be replaced at Alcatel’s factory.

 

Copyright

©

 2002 by Alcatel Internetworking, Inc. All rights reserved. This 

document may not be reproduced in whole or in part without the express 
written permission of Alcatel Internetworking, Inc. 

Alcatel

®

 and the Alcatel logo are registered trademarks of Alcatel. Xylan

®

OmniSwitch

®

, PizzaSwitch

®

 and OmniStack

®

 are registered trademarks of 

Alcatel Internetworking, Inc. AutoTracker™, OmniAccess™, OmniCore™, 
Omni Switch/Router™, OmniVista™, PizzaPort™, PolicyView™, 
RouterView™, SwitchManager™, SwitchStart™, VoiceView™, WANView™, 
WebView™, X-Cell™, X-Vision™ and the Xylan logo are trademarks of Alcatel
Internetworking, Inc. All-In-One

 

SM

 

 is a service mark of Alcatel 

Internetworking, Inc. All other brand and product names are trademarks of 
their respective companies.

Alcatel Internetworking

26801 West Agoura Road

Calabasas, CA 91301

(818) 880-3500 FAX (818) 880-3505

[email protected]

US Customer Support: (800) 995-2696

International Customer Support: (818) 878-4507

Internet–http://www.ind.alcatel.com

Summary of Contents for OA-512




















Reviews: