Alcatel-Lucent CellPipe 7130, Manual

Page: 23 / 154

4-1 3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
4 Accessing the CellPipe
7130 RG web
configuration tool
Overview
Purpose
This chapter explains how to access the CellPipe 7130 RG web configuration tool by
entering the IP address and the default passwords.
The management interface software is HTML-based and can be accessed using a web
browser.
Contents
This chapter covers the following topic:
To access the CellPipe 7130 RG web configuration tool
When to use
Use this procedure to access the web configuration interface of the CellPipe 7130 RG. The
configuration interface enables you to secure the CellPipe 7130 RG, limit access, set
traffic routes, modify passwords, and change advanced settings.
Before you begin
Before you can configure the CellPipe 7130 RG, it must be installed, connected to a web-
enabled PC, and turned on.
Management IP settings
To establish the initial connection, either use a computer configured to be a DHCP client,
or use a computer with IP settings in the 192.168.2.0 subnet. The IP address of the web
configuration is 192.168.2.1 with a subnet mask of 255.255.255.0.
To access the CellPipe 7130 RG web configuration tool
4-1