,VVXH 0D\
To configure the gateway and the LAN port enter the
,3$GGUHVV
and the
6XEQHW0DVN
.
For example: IP Address 10.x.x.x or 192.x.x.x and Subnet Mask 255.255.255.0
$GGLWLRQDO,QIRUPDWLRQ
This defines the IP address of local port and has to be a
private one. The subnet mask determines the number of computers that are allowed in
this local network. A class C network with the subnet mask 255.255.255.0 allows up
to 253 users in your local area network. Usually a class C network is satisfactory for
a LAN environment.
To enable the
'+&36HUYLFH
click the pull-down menu and enable the DHCP server on
this unit.
Enter the
'+&36WDUW,3$GGUHVV
.
This specifies the starting IP address for DHCP users, which has 192.168.2.10 as default
value.
Enter the
'+&3(QG,3$GGUHVV
This specifies the ending IP address for DHCP users, which has 192.168.2.254 as default
value.
1RWH
Please make sure that there is no existing LAN client with fixed IP address
within the range you assigned here. Otherwise, the DHCP client may not get the IP
address correctly.
Enter the
'+&3/HDVH7LPH
.
$GGLWLRQDOLQIRUPDWLRQ
A DHCP user's PC gets the IP address with a lease time.
When the lease time is expired, the user's PC must connect to the DHCP server to
request the dynamic IP address again. When there are many nomadic users using
DHCP service in your network, select an appropriate time to make sure IP addresses
will be released after they logout. The gateway may not know at when an user turns
his computer off and leaves, thus that IP address will be occupied there until the lease
time expires. The default value of the lease time is 72 hours.
Enter the
'+&3'RPDLQ1DPH
.
The name for your group or zone. This will be published with your DHCP service.
