background image

YL

,VVXH 0D\

information than needed by many of the readers. Before you start reading the manual, it is 
therefore necessary to assess which aspects or chapters will cover the individual area of 
interest.

The following information is provided in this information product:

Quick Installation Guide (QIG)

Install the CPE

The Web Management Interface

Access to Web Management Interface via Internet browser

Configure the CPE by using the Web Management Interface

Guidance for troubleshooting

Configuring the TCP/IP protocols on the PC.

6DIHW\LQIRUPDWLRQ

,PSRUWDQW

The following information lists the safety reminders for installation and 

maintenance personnel.

Read all instructions before attempting to unpack, install, operate, or connect power to 
this CPE. Please remember the following when you unpack and install this equipment:

Always follow basic safety precautions to reduce the risk of fire, electrical shock 
and injury.

To prevent fire or shock hazard, do not expose the CPE to rain, moisture or install 
this equipment near water. Never spill any form of liquid on or into this product.

Do not insert any sharp object into the products module openings or empty slots. 
Doing so may accidentally damage its parts.

Do not attach the power supply cable on building surfaces or floorings. Rest the 
power cable freely without any obstacle or heavy items piled on top of it. Refrain 
from abusing, stepping or walking on the cable.

To protect the equipment from overheating, do not block the slots and openings in 
the module housing that provide ventilation.

Exercise caution when installing or modifying telephone lines. Never install 
telephone wiring during inclement weather conditions (i.e., storm).

Electrostatic discharge (ESD) can permanently damage semiconductor devices. 
Always follow ESD-prevention guidelines for equipment handling and storage.

&RQYHQWLRQVXVHG

,PSRUWDQW

Introduces important additional information.

&$87,21:DUQVWKDWDIDLOXUHWRIROORZWKHUHFRPPHQGHGSURFHGXUHFRXOGUHVXOWLQORVVRIGDWDRU

GDPDJHWRHTXLSPHQW
:$51,1*:DUQVWKDWDIDLOXUHWRWDNHDSSURSULDWHVDIHW\SUHFDXWLRQVFRXOGUHVXOWLQSK\VLFDOLQMXU\,Q

DGGLWLRQLWZDUQVRIGDQJHURIHOHFWULFDOVKRFN

Summary of Contents for 500V Series

































































































Reviews: