Albrecht GP 1, Instruction Manual, Page: 20 / 38

User Manual Albrecht GP 1
20
6.4. POINTER page
When you are moving, with no particular endpoint or target destination in mind, the
pointer page will show you in which direction you are moving, and at what speed. If
you are travelling to a specific endpoint or destination, the pointer page will then
show you the name of the location, the distance to the location, and the time it will
take to get there. The pointer page displays the following information:
1.
•
Tracking GPS Satellites number
•
If there is a destination, bearing and straight line distance to the
destination.
•
Large directional arrow is the direction where you are going.
•
An information bar at the bottom of the display permits viewing the following
parameters when the Up/Down switch is used:
•
Current coordinates – Longitude & Latitude
•
Date & Time
•
ALTITUDE – The measurement of height above mean sea level
•
HEADING - Current heading in degrees.
•
ODOMETER – The distance of your travel since the last trip reset.
•
TRIP TIME – The elapsed time after power-on.
•
BEARING - Your direction of travel with respect to a visible waypoint or your intended
destination, or True North (True Bearing).
•
DISTANCE – The straight line distance to the destination.
•
E.T.A – Estimated time to arrival to the destination. (based on the average speed)
•
SUNRISE - Time in hours and minutes of sunrise (dependent on setup selections).
•
SUNSET - Time in hours and minutes of sunset (dependent on setup selections).
•
MAX. SPEED - The maximum speed traveled since last trip reset.
•
AVG. SPEED - The average speed traveled since last trip reset.
•
SPEED - Current speed of travel in MPH and knots (KT).
•
When the wheel key Enter switch is pressed, a sub-menu providing several options related
to your trip; these options can be selected using the Up and Down buttons; then press the
Enter button to change the trip data.
•
AHEAD/NORTHWARD? – When this item is highlighted, press Enter to orient
the top of the pointer page display with respect to waypoints or targets ahead of
your intended track, or with respect to True North.
•
RESET TRIP? - When this item is highlighted, press Enter to clear
an existing trip. The graphic representation of the trip remains, but
average speed, Trip time and odometer are reset.
•
INITIALIZE? - When this item is highlighted, press Enter to
recalculate your location after the unit has been inactive for a
while, or if you have moved more than 500 miles.
•
STOP NAV? – Stops any active navigation there is a destination.
•
SKIP WPT? – Skips current waypoint and start navigation with next waypoint.
NOTE: “Stop navigation” & “skip waypoint” fields will be shown only during
GOTO/GO ALONG/TRACKBACK function.