8. Select the band frequency by region in band selection window for the application to
receive the digital signal. Or select
“others”
to manually set up the band frequency.
(Figure 2.6) After this step, you need to plug-in DAB Receiver to configure the
hardware.
(Figure 2.7)
9. Please plug-in the DAB receiver. If the correct DAB receiver is not properly plugged
in, the installer will popup the following message to remind you. If the same problem
occurs again after you plug in the correct DAB receiver, please go to the store where
the receiver is purchased for help.
(Figure2.8)
10. The Device Driver Installation Wizard will show up to help you install the driver. Click
Next
to continue.
