9
The country programming is valid until you set a new country programming, even if
disconnected from power supply for a longer period of time!
The basic setting for the device to turn on when the first time connected to 12V can for
certain countries be set differently ex factory!
With first use
devices purchased in Germany
start with AM / FM programming:
•
dE
80/40
operation on 80 channels in FM and 40 channels in AM. The
preset channel is channel 9 in AM; the device starts on the international trucker
and emergency channel. After a few moments
dE
is displayed (for Germany).
This programming is only permitted for Germany, the Czech Republic and Slovakia and is
not to be used in any other country (in the Czech Republic only 80 FM and in SK only
channels 1-40 in FM + channels 70-80 are to be used).
•
EU
40/40
operation on 40 channels in FM and 40 channels in AM. The
preset channel here is also channel 9 in AM; the device starts on the international
trucker and emergency channel. After a few moments
EU
is displayed
(for
Europe).
This programming is designed for Belgium, Bulgaria, Germany, Estonia, Switzerland (incl.
Liechtenstein), Finland, France, Greece, Ireland, Italy, Latvia, the Netherlands, Poland,
Portugal, Romania and Spain. For Poland a special programming exists (see below) with the
frequencies according to the old Polish standard offset 5 kHz downward. For Spain also still
a special programming exists with 4 Watts AM; this and the Polish switch setting are only to
be used in the respective countries.
•
EC
40 FM
operation on 40 channels in FM (former
CEPT
setting).
Not all EU countries (
EC
setting) already permit AM operation for CB radios. Denmark, the
UK, Greece, Iceland, Croatia, Luxembourg, Lithuania, Malta, Norway, Sweden, Slovenia,
Hungary and Cyprus temporarily only use the
EC
40 FM programming, until the new
regulations are finally implemented.
•
Po
40/40
operation on 40 channels in FM (4 Watts) and 40 channels in AM
(4 Watt) on the frequencies formerly common in Poland, which are offset
against the international frequencies by 5 kHz. This setting is only permitted in
Poland, nowhere else!
•
E
40/40
operation on 40 channels in FM (4 Watts) and 40 channels in AM
(4 Watts). This setting is
the new European CEPT setting
. Currently, at the
time of this manual going to press, this setting applies already in Spain and
Italy. The other countries will follow.
•
U
40 FM
40 channels FM operation in the UK and Northern Ireland.
In Austria operation of switchable radios is generally not permitted. You may leave your radio
installed while crossing these countries, but you are not allowed to operate them.
For
Austrian customers we supply a version AE 6891 FM without country selection.
Authorized
dealers are also permitted to change devices for Austria.
Observe the country regulations according to device ID! The latest country regulations you
can find on the current device ID, which you can download from our web site
http://service.alan-electronics.de
