14
twinkles continuously and the machine turns to settle dehumidify defrost
mode: dehumidify for 20 minutes and defrost for 5 minutes (circulation).
When the machine
’
s temperature and humidity sensor and the evaporator
copper pipe
’
s temperature sensor becomes malfunction or loose, all the
function buttons can operate normally. The machine can still be used, only
the effect will be a little bit worse.
(4 i) Power off memory function
Press POWER button to turn off the machine (without unplugging the
power cord), press POWER button to turn on the machine, it will remain the
former operate mode. If there is a power failure (unplug the power cord or
the power outage) when the machine operates, the machine will reboot
automatically and operate in continuously dehumidify mode and fan in
middle grade when the power resumes.
(4 j) Continuous drainage function
When it needs continuous drainage, remove the drain plug, connect the
drain with the bundled rubber pipe. There will be no water in the water
tank when the machine operates. The machine can operate continuously
and will not turn off because of the water tank full.
NOTE!
When continuous drainage, the drain pipe should be placed flat on
the ground. Any part of the pipe can not be folded and up-wrapped, in case
that the pipe jammed and no water can flow out.
