17
2.
Move up the slide button D (left side of the BillyOne – see page. 6) and, while holding it up,
pull the cover lid backwards; then lift the cover up and rotate it 180° around the flat cable.
3.
Gently wipe the sensors with a clean, lint-free cloth, or a cotton swab or with a small
sponge, possibly moistened with isopropyl alcohol.
4.
Remove all dust and debris from the 4 silicon rollers, as well as from the relevant 4
matching wheels located beneath the cover lid. To remove the toughest calculus that may be
gripping on rollers and wheels, make use of isopropyl alcohol.
IMPORTANT: do not use organic
solvents (eg methylated spirits, paint
thinner or petrol). Use only isopropyl
alcohol.
1.
Sensors
2.
Silicon rollers
3.
Matching wheels
5.
Re-assemble the validator head by rotating 180° back the cover lid, lean it on its base until
the base hooks get into their holes, then slide it frontward until hearing the closing “click”.
9.1.2 Clearing jammed banknotes:
Please proceed as explained in points 1 and 2 above, to get access to the jammed banknotes. Once
removed the jamming has been removed, follow sdtep 5 to re-assemble.
10. Disposal of the product
WARNING! DISPOSE OF ACCORDING TO THE GOVERNING LAW
IN YOUR COUNTRY!
This equipment may not be treated as household waste. Instead, it must be
handed over to the applicable collection point for the recycling of electric
and electronic equipment. By ensuring that this product is dised of
correctly, you will help to prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
For more detailed information about recycling of this product, please
contact the Dealer where you purchased this product.
D
A
A
A
A
A
B
C
