Dear Customer,
we would like to thank you and congratulate for your choice. We trust that you will appreciate the quality and performance of the
CMS ARM ccTalk pcb for Money-Changer machines.
1
Introduction
The ChangeOne CMS ARM p.c. board is equipped with a high performing ARM microprocessor, enabling a large
number of functions. The “Full” version of the CMS Arm pcb (CMS Arm “F”) is equipped with back
-up battery and can
support POS terminals (Nayax, Worldline Valina, PayTer).
Any of these two pc boards can be configured by the Operator to manage various peripheral units, so as to create simple
change systems or multifunctional change systems. They can also replace the old CMS Freescale, by interposing a Hub
pcb for the connection of the peripheral devices (see section 7).
It manages the following peripheral units (see chapter 5.0 for the possible settings):
-
ccTalk AL66S or AL66 FG coin acceptors.
-
Up to 2 x dispensing ccTalk HopperOneS11 or HopperCD or Hoppers Discriminator Alberici.
-
ccTalk BillyOne or OryOne note validator.
-
ACS reader for RFID cards and keys.
-
[only CMS Arm “F”] POS terminal (Nayax, Worldline Valin
a, PayTer) via interface
Available functions:
-
Change of notes / coins into 1 or 2 coin/token denomination(s), or 3 coin denominations (HopperDiscriminator)
-
Purchase of tokens, with or without Bonus
-
Load of credit on RFID User Cards and Keys by ACS reader
-
Control of status of the system and of accounts via display (via on-board buttons or external keypad)
-
Programming via menu (by on-board board keys)
2
Mounting and size
The board and the LCD display are pre-assembled on a transparent polycarbonate support (overall size: 157 x 49 x
45 mm). Track the positions of the 4 holes for the fixing studs on the polycarbonate screen. Distance between holes is
105x35mm. Studs, nuts and related small parts are not supplied with the board.
Please read carefully this handbook, to obtain the most from your device.
