background image

 

 

Key 

initialized!

 

Antenna 

initialized!

 

Enter PIN 

0

 

 

5.2.4.4

 

SET UP CASHLESS  

(only if the ACS reader is built-in)

 

If the unit is equipped with the ACS reader, it is possible to get access to useful functions:

 

 

Operation

 

Master Card/Key 

(black) for the  

owner

 

Service Card/Key 

(white) for the 

manager

 

Operator 

Card/Key 

(yellow)

 

1.  Initialize Service and Operator Card/Keys

 

YES

 

YES (only Operator’s)

 

NO

 

2.  Enable white Card/Key to collect money

 

YES (from Menu)

 

NO

 

NO

 

3.  Check Accounts (totals and partials)

 

YES

 

YES (partials only)

 

NO

 

4.  Print Accounts

 

YES

 

NO

 

NO

 

5.  Reset Accounts Data

 

YES

 

YES (partials only)

 

NO

 

6.  Reset of paid residual credit

 

YES

 

YES

 

NO

 

7.  Access to (optional) manual Refill

 

YES

 

YES

 

NO

 

 

              

The Master Card/Key allows to initialize the Service and the Operator Card/Key from the ACS reader.

 

 

Whenever the Master Card/Key or the Service Card/Key gets access to the Accounts menu, the 

shown data get automatically downloaded in the Card/Key. Each Card/Key can contain up to 10 
downloaded sets. These data

 

sets can be read and stored in the PC via the ACR Programming 

Station (K-P4N-000007) and software.

 

 

When entering the Cashless Setup menu, the display will request to initialize the Card/Key reader (antenna).  

 

Work out one 6 digits PIN code, write it down and keep it in a safe place.

 

Insert the Master Card/Key and press the OK button: you will be  

prompted to enter the PIN code. Insert the 6 digits PIN. To enter each of  

the

 

6 digits, make use of the UP and DOWN buttons. When the desired  

character is displayed, confirm it by the OK button. 

 
 

After entering the 6th character, the display will prompt for confirming the PIN code.  

Enter it again: initialization of the Card/Key reader and of the Master  

Card/Key will start.

 

When finished, the confirmation message appears:

 

 

Insert the Service Card/Key: the CPU 4-digit pin code (see section 

9.3.13 Change PIN) will be requested; enter it to get the Service Card/Key 

initialized.

 

Once the process is complete, the confirmation message appears: 

 

To initialize the Operator or the User Card/Keys, exit the menu, put the Master Card/Key or the Service Card/Key 

in the reader, and navigate the menu by “+”

 until finding RESTRICTED MENU: press OK, and navigate to 

INITIALIZE CARD/KEYS, then press OK. Insert the Operator Card/Key and follow the on-screen instructions: 

 

 
 

 
 
 

                              

     Insert Operator      

Card/Key (yellow) 

                              

 

            

Wait……

 

 

 

 

 

      Remove the 
 initialized Card/Key 

Key 

initialized!

 

Do not remove the 

key

 

Init. Operator 

Key

 

Summary of Contents for CHANGEONE CMS Arm

























Reviews: