Alber twion User Manual Download

Page: 30 / 31

Explanation of symbols

The following sections explains the symbols used on the wheel‘s system label and the battery charger‘s technical data
label.

The twion conforms to the requirements laid down in the European Medical Device Directive 93/42/EEC as well as the
applicable sections of standard DIN EN 12184.
The battery charger conforms to European guidelines.

Disposal instructions, see chapter 9.4.

Warning against magnetic fields and forces.

Protect the device from moisture.

Only use the device inside your home, not outdoors.

Indicates the temperature range in which the device can be used.

Protective insulation / appliance class 2

Complies with US and Canadian guidelines

Important, observe accompanying documents.

Maximum weight of person that the twion can accept as its load capacity (120 kg).

Specifies the date of manufacture

Name and address of the device manufacturer

This operating manual is available for download on our website

www.alber.de

If you require a version that is written in a larger font, contact our Alber Service Center.

Summary of Contents for twion
































Search results

Summary of Contents for twion

Reviews:

Related manuals for twion

Brands by name

Popular brands

Alber twion, User Manual

Search results

Summary of Contents for twion

Reviews:

Related manuals for twion

Brands by name

Popular brands