manualshive.com logo in svg

Alber twion, User Manual, Page: 29 / 31

Share
Download
Alber twion User Manual Download Page 29

26

System label on the twion wheel

Please specify the system number of the wheel when exchanging a 
device as part of the Alber exchange parts pool.  
The system label is on the back of the twion wheel.

“Safety inspection” label on the twion wheel

The label should remind you when your next safety inspection is 
due.  
It is on the back of the twion wheel.

“Technical data” label on the battery charger

The label shown in the adjacent diagram is found on the underside 
of the battery charger and provides information on its technical 
data.

Component label on the battery charger

Please specify the component number of the battery charger (num-
ber in the middle of the label, shown by an arrow in the adjacent 
diagram) when replacing the device within the Alber exchange 
parts pool.  
The component label is on the underside of the battery charger.

50 °C

-25 °C

02/2014

science and technology. However, the service life may also be reduced significantly by excessive or improper use. The service life required 
by the applicable standards shall not be deemed an additional guarantee.

The twion conforms to the requirements laid down in the European Medical Device Directive 93/42/EEC 
as well as the applicable sections of standard DIN EN 12184.

 

The battery charger conforms to European guidelines.

We reserve the right to modify the design and technology of our products to incorporate the latest developments.

12. Labels and explanation of symbols

There are labels on the wheels and the battery charger which contain various details on the product. In the event of a system defect, com-
ponents can be replaced by your specialist dealer as part of the Alber exchange parts pool. Your specialist dealer will need some of the 
information given on the labels.

Summary of Contents for twion
































Reviews:

No comments