Enter Setup
31 *
* Exit Setup
Set Terminating Character Suffix
The engine provides a shortcut for setting the terminating character suffix to CR (0x0D) or CRLF
(0x0D,0x0A) and enabling it by scanning the appropriate barcode below.
**
Terminating Character CR (0x0D)
Terminating Character CRLF (0x0D,0x0A)
To set a terminating character suffix, scan the
Set Terminating Character Suffix
barcode and the
numeric barcodes representing the hexadecimal value of a desired terminating character and then scan
the
Save
barcode. Refer to
Appendix 3: ASCII Table
for hexadecimal values of terminating characters.
Note:
A terminating character suffix cannot exceed 7 characters.
Set Terminating Character Suffix
Example: Set the terminating character suffix to 0x0D
1. Scan the
Enter Setup
barcode.
2. Scan the
Set Terminating Character Suffix
barcode.
3. Scan the numeric
barcodes “0” and “D”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode.