Enter Setup
29 *
* Exit Setup
Custom Suffix
Enable/Disable Custom Suffix
If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed
11 characters.
Enable Custom Suffix
**
Disable Custom Suffix
Set Custom Suffix
To set a custom suffix, scan the
Set Custom Suffix
barcode and the numeric barcodes representing the
hexadecimal values of a desired suffix and then scan the
Save
barcode. Refer to
Appendix 3: ASCII
Table
for hexadecimal values of characters.
Note:
A custom suffix cannot exceed 11 characters.
Set Custom Suffix
Example: Set the custom suffix to
“CODE”
1. Check the hex values of
“CODE” in the ASCII Table. (“CODE”: 43, 4F, 44, 45)
2. Scan the
Enter Setup
barcode.
3. Scan the
Set Custom Suffix
barcode.
4. Scan the numeric
barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5”.
5. Scan the
Save
barcode.
6. Scan the
Exit Setup
barcode.