Albalá Ingenieros DSW3000C02, Manual

Page: 6 / 32

Albalá Ingenieros | Manual DSW3000C03
1.2. Features
• Automatic change-over switch for 2048kbit/s ITU-T G.703 signals.
• Switches between three input sources.
• Provides LOS and AIS detectors for each input.
• The selected input is distributed to three outputs.
• Provides three modes of operation: Automatic, Semiautomatic and Manual.
• Main input will be bypassed to one of the outputs in case of power loss.
• Acoustic and visual indicators warn against changes in the selected source.
• Front panel indicators for input selected, absence of signal, operating mode and alarm.
• Module control and supervision can be done remotely when the mounting frame is
equipped with a communications controller module.
• One UR3000 mounting frame can house up to 12 DSW3000C03 modules. If power
supply redundancy is required and FA3000 or FA3001 modules are used then only 10
modules can be housed in the mounting frame. If PSU3300 or PSU3301 modules are
used for this purpose then up to 12 modules can be installed.
• One UR3100 mounting frame can house up to three DSW3000C03 modules.
• Low power.
6