Albalá Ingenieros DSW3000C02, Manual

Page: 14 / 32

Albalá Ingenieros | Manual DSW3000C03
3.6. Interconnection
The following figure shows the DSW3000C03 module rear board connector layout.
Rear view of the DSW3000C03
The DSW3000C03 module provides three signal inputs (MAIN IN, RES.IN and AUX. IN)
and three signal outputs (MAIN OUT, OUT and OUT). The connector labeled ''MAIN OUT''
corresponds to the output signal protected by a bypass relay that connects it to ''MAIN
IN'' and provides signal continuity in the case of a power supply failure. The module also
provides three GPIs (MAIN FAIL IN, RES. FAIL IN and AUX. FAIL IN), five GPOs (MAIN FAIL
OUT, RES. FAIL OUT, AUX. FAIL OUT, MAIN SEL. and RES. SEL.) and an input for control of the
bypass relay, (BYPASS) whose function is described in the following table:
14