Albalá Ingenieros DSW3000C02, Manual

Page: 25 / 32

Albalá Ingenieros | Manual DSW3000C03
The following functions of the DSW3000C03 can be performed remotely:
- Configuration of the operating mode and the input selected.
- Supervision of the input signal's status.
4.5.1. Details of the DSW3000C03 registers
The DSW3000C03 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The EEPROM section parameters are rarely used and are stored directly in non-volatile
memory.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 1.X
CONTROL
Name add ext msk snmp trap Description
MODE 0x00 0x03 Y Y Allows selecting the switching mode
0=Full auto, 1=Half auto, 2=Manual
BUZZER 0x00 0x04 Y N Allows buzzer operation
0=Disabled, 1=Enabled
INPUT 0x01 0x03 Y Y Selected input
0=Main, 1=Reserve, 2=Auxiliar
MAIN_FAIL_MASK 0x02 0x01 N N Allows masking fail in main input
0=Disabled, 1=Enabled
EXT_MAIN_F_MASK 0x02 0x02 N N Allows masking fail in main external input fail
0=Disabled, 1=Enabled
RES_FAIL_MASK 0x02 0x04 N N Allows masking fail in reserve input
0=Disabled, 1=Enabled
EXT_RES_F_MASK 0x02 0x08 N N Allows masking fail in reserve external input fail
0=Disabled, 1=Enabled
AUX_FAIL_MASK 0x02 0x10 N N Allows masking fail in auxiliar input
0=Disabled, 1=Enabled
EXT_AUX_F_MASK 0x02 0x20 N N Allows masking fail in auxiliar external input fail
0=Disabled, 1=Enabled
EEPROM
Name add ext msk snmp trap Description
AUX_IN_DISABLE 0x00 0x1A 0x01 N N Disables the auxiliary input
0=No, 1=Yes
INVERT_PRIORITY 0x00 0x1B 0x01 N N Allows changing the input priority to AUX-RES-MAIN
0=No, 1=Yes
STATUS
Name add ext msk snmp trap Description
25