0
IMPORTANT SAFETY INSTRUCTIONS –
SAVE THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE
READ ALL INSTRUCTIONS BEFORE USE
When using your
$OED&KHP
steam station, basic safety precautions should always be
followed. Please read the following instructions carefully as they provide important
infor-mation concerning how to install, use and care for this product.
1.
To protect against the risk of electric shock, do not immerse the appliance
in water.
2.
Do not allow the cord to touch hot surfaces.
3.
Always allow the appliance to cool for at least thirty minutes before storing.
4.
Always put the appliance in a secure place on a table or counter when using.
5.
Do not move the appliance without unplugging it first.
6.
Always disconnect the appliance from the outlet before filling with or removing water.
Be careful to avoid spilling water on the appliance when filling.
7.
Use tap water or 50/50 tap/distilled water in the appliance. Do not use perfumed or
products containing alcohol in the appliance.
8.
Always disconnect the appliance when not in use.
9.
Do not use the appliance if the cord is damaged. Return the appliance or have the
cord repaired by the manufacturer, or their service agent.
10.
Do not operate the appliance if it has been dropped or damaged. Do not disassemble
the appliance. Incorrect reassembly can cause a risk of electric shock. Send it to an
authorized service center for repair.
11.
Do not operate another high wattage appliance on the same circuit.
12.
This appliance must be grounded. Do not alter the plug or attempt to remove
this feature.
13.
Be careful. Burns can occur from touching hot metal parts or steam.
14.
This appliance is not intended for use by young children.
15.
While using the appliance, never unscrew or remove the cap (1) while the boiler is
under pressure.
16.
Before removing the cap, make sure there’s no more steam in the steam chamber by
shutting the boiler switch (4) to the off position, and pressing the steam iron button
(7) to release all of the remaining steam.
17.
To ensure your safety, the safety cap (1) and all other components must be replaced
with original parts only.
