Alasking AH-500R Installation & Operation Manual Download Page 16

- 13 -

Maintenance and Safety Guide

 : 

(7) 保養及安全注意事項:

Maintenance

外蓋

外蓋

外蓋

外蓋

Cover Unit

Dust Filter

防塵過濾網

外蓋

3.

Stop:

It can stop all the functions with emergency when the remote controller is abnormality, and the filter 

will be re-setting.

Operation

(1) Press          button, and all the functions will be stopped. Press it for 3 seconds, the timer of the filter 
      will be re-starting, and the using time of the filter is about 1000 hours. 

(2) When the filter light            is bright (yellow light is twinkling), and then the filter should be cleaned.      

3. 停止:

如遙控器異常時,可由此緊急停止所有功能;另有濾網清潔覆歸功能。

按        後,所有功能全部停止;按壓3秒則清潔濾網時間歸零,重新計算,預設濾網清潔時間1000
小時。

停止

OFF

停止

OFF

(2)

 

清潔濾網燈亮起(黃色燈閃爍),即表示濾網清潔時間到。

 

2.

Remote:

When you change the remote controller or the receiver, and then it has to do frequent pairs again.

Operation

(1) Press          for 3 seconds, and the yellow indicator light and green indicator light will be blinked 
     

    

 simultaneously, and after installing the battery in the remote controller (press         and          at the 

     same time). The receiver will do frequent pairs automatically, and after doing it, the sound will be 

     about one second “Beep”. It is very important that the frequent pairs should be finished in one 

     minute; otherwise it should do the frequent pairs again. 

OPERATE

對頻

(3)

 

當熱功能運轉停止後,扇葉仍會運轉約20秒,以對加熱器進行冷卻。

(3) After operation stops, the fan operates for about 20 seconds. For cooling the heater .

Summary of Contents for AH-500R





















Reviews: