Alasking AH-500R, Installation & Operation Manual

Page: 14 / 20

- 11 -
當熱功能運轉停止後，扇葉仍會運轉約20秒，以對加熱器進行冷卻。
5. 高溫/中溫暖房功能
冬天時可於入浴前10分鐘，啟動”高溫/中溫暖房”功能，先將浴室預熱及提升室溫，即可享受溫暖舒適ˋ
入浴樂趣。
啟動：選擇 、 鍵，紅色指示燈亮起，高溫/中溫暖房模式開始運轉。
停止：當按 或運轉完所設時間後，紅色指示燈及黃色指示燈會熄滅，本機自動停止。
定時：預設時間為0.5小時，可通過 改變設定時間，重覆按壓，依照 順序跳號，
時間會依據剩餘時間顯示黃色指示燈，下次啟動會依使用者習慣，自動記憶前次設定。
5. Heat (HI) / (MED) Function :
Before taking the bath, start the heating function 10 minutes ahead to warm the bathroom
beforehand. This function is used in cold seasons to increase temperature of bathroom and
make people feel warm as taking a bath or a shower.
Operation
(1) Start
6. Status:
When you start the functions and the indicator light will blink, and in order to extend the using
time of the battery, the indicator light will go out after a few seconds. By using this status
function, it can help users to affirm the current operating function.
Operation
(1) Start : Press button, and the indicator will show the current operating function and the indicator
light of remainder will show the surplus time.
Press / button to start the heat mode for operation and the red indicator blinks.
(2)
(3)
(4) After operation stops , the fan operates for about 20 seconds. For cooling the heater .
＊
This product operates the assigned running mode first after pressing any of control buttons.
＊ 任何時候只要按”功能鍵”，本機以執行”功能鍵”之指定運轉模式為第一優先。
Timer Initial set time is 0.5 hour. During running, you can press to change the set time.
You can set time for the heat mode in the range of 30 minutes ~ 8 hours.This product
shows the remaining time by red indicator memorizes the previous set time
automatically for next operation.
Stop To stop midway in running, press button. This product will stop automatically when
the set time is up. The red and yellow indicators go out and then the product will stop
automatically.
6. 狀態顯示
選擇任一功能鍵後指示燈會亮起；為延長電池使用壽命，指示燈亮起後約數秒會自動熄滅，需透過”狀態顯示”
鍵來確認目前運轉狀態，以便後續操作。
啟動：選擇 鍵，目前運轉中功能、剩餘時間的指示燈會亮起，如無其他操作，則約數秒後自動熄滅。