35
alarm panel during a predefined schedule.
Should the Group 1 enter the lock outside of the
scheduled time, the alarm will not disarm. The
alarm panel must be armed through other means
(such as an Alarm Panel Keypad). The Burglary
Alarm Panel must be programmed to disarm from
an Armed State Only and the zone input must be
programmed for input disarming.
•
GROUP 1 ENABLES GROUP 4 USERS
= A Group
1 USER CODE entry during a predefined
schedule will allow access to Group 4 Users.
•
GROUP 1 PUTS UNIT IN PASSAGE
= A Group 1
USER CODE entry during a pre-defined schedule
will unlock unit.
INSTALLER
= See.... CODE, INSTALLER CODE.
KEYPAD
= 10-numeric keys,
:
and special
;
key.
•
KEYPAD LOCKOUT
= Keypad is programmed to
lockout Users, for a specified period of time, when
a specified number of invalid User Codes are en-
tered.
•
KEYPAD PROGRAMMING
= Ability to program the
lock through the keypad.
KEYPRESS
= Pressing a button on the Lock’s Keypad.
LEVEL ABILITY
= Predefined User Types (such as
Master, Installer, Manager, Supervisor, and Print
Only User) have specific abilities to program and/or
control the lock.
LOCKOUT ATTEMPTS
= A specified number of invalid
User Code entries (1-9), that will disable the keypad
for a predefined period of time (1-60 seconds).
LOCKOUT TIME
= A predefined time (1-60) seconds
that the lock will stop accepting User Codes, after a
specified number of invalid User Code entries (1-9).
LOG
= See... AUDIT TRAIL.
MANAGER
= See... CODE, MANAGER CODE.
MASTER
= See... CODE, MASTER CODE.
PASSAGE
= Allow anyone to pass through the door
without USER CODES (door is unlocked).
PRINTER
= A printout device such as an infrared printer
or computer printer.
PROGRAM MODE
= A mode allowing program/data to
be entered through the keypad. Only specific Users
can program a lock manually, by entering their USER
CODE, followed by the [
;
] key. To exit program
mode, hold any key until repeated beeps are heard.
REMOTE INPUT
= Entry into a restricted area, by
pressing a button connected to the REMOTE INPUT
WIRES (White and White) by someone on the other
side of the door.
SCHEDULE
= A programmed operation (enable/
disable, lock/unlock, etc.) on a specific day (Sunday
through Saturday) and time.
SCHEDULES, QUICK
= Any one of four most common
types of schedules can be programmed.
TIME
= Hours and Minutes in the HHMM format.
TIME/DATE STAMP
= A recorded date and time that an
event occurred.
TIMEOUT
= Immediate operation for a specified number
of hours.
UPLOAD
= Receive data from the lock or AL-DTM.
USER
= A person who has been provided with a USER
CODE for access through the door.
USER LOCKOUT, TOTAL
= All Users (except for
Master Code) have been locked out.
Glossary (cont'd)
