28
7.
Retrieve Additional Lock Logs
by repeating Steps 4 through
6 for each lock Log to be retrieved.
8.
Reconnect the AL-DTM to the DL-Windows PC (using the
AL-PCI2 cable) to retrieve the Event Logs from the AL-
DTM.
On the
DTM Support
screen, click
Receive Data From
the DTM for Selected Locks
to receive the Event Logs stored
in the AL-DTM.
The AL-DTM status window indicates successful
communications.
9.
View Logs Received From the AL-DTM.
Open the
Event
Log Viewer
screen for each lock Log.
The AL-DTM can be programmed to receive the program from the
locks. Receiving the program can be a useful tool to monitor addi-
tions or changes made at the lock as well as import locks into a
new DL-Windows account.
The procedure for receiving the program from the lock with the AL-
DTM is similar to receiving logs. Click in the
DTM Function
col-
umn for the selected lock, click the down arrow and select the
"
Receive Program
"
Function
in the pull-down menu. Follow the
same procedures in the section above to program the AL-DTM
and retrieve data from the lock.
Refer to
Receiving Data from the Lock
on page 23 for more infor-
mation.
After all lock programming has been completed, the AL-DTM can
be easily re-configured to retrieve event logs.
1. In
DTM Support
screen click in the
DTM Function
column for
the selected lock, click the down arrow and the pull-down menu
will display. Select the "
Receive Log
"
Function
.
Multiple locks can be programmed to receive logs by right click-
ing in the
DTM Function
column and select "
Change All to
'Receive Log
."
2. Transfer the Configuration to the AL-DTM. Connect
AL-DTM
to the DL-Windows PC (using the AL-PCI2 cable)
then click
Program DTM for Selected Locks
to transfer the new
configuration to the AL-DTM.
The following window will display:
3.
Enter PC Comm mode.
On the AL-DTM, press the green
button and the following will display on the AL-DTM:
Unplug the AL-DTM.
The AL-DTM is now ready to retrieve event logs from the locks.
4.
Connect the configured AL-DTM to the Lock
using the dou-
ble-ended banana plug cable, observing tab direction.
5.
Enter the User 299 User Code at the lock keypad.
The AL-
DTM will briefly display a message that it is "Analyzing Lock"
and then will display the following:
6.
Re-Enter User 299 User Code at the lock keypad.
The AL-DTM will display the following:
C o m m . C o m p l e t e ,
0 7 / 2 4 / 0 6 0 2 : 0 8 P M
L o c k ’ s t i m e a n d
d a t e , u p d a t e d .
0 9 9 3 F R E E
M E M O R Y B L O C K S
D o o r 0 0 0 1 , R e a d
L O G P a c k e t 0 0 1
P C C O M M U N I C A T I O N
I N P R O G R E S S .
0 9 9 3 F R E E
M E M O R Y B L O C K S
C O M M . C O M P L E T E ,
0 7 / 2 4 / 0 6
Receive Event Logs with the AL-DTM
R e - e n t e r 2 9 9
C o d e t o C o n t i n u e
Typical Event Log
Receiving Program with the AL-DTM
