8
ADC-V821 Installation Guide
ADC-V821 Installation Guide
9
8
For hard ceiling and wall installations only: Attach the
base of the camera to the mounting location using the
included screws.
9
Rotate the camera gimbal as shown in the image to
achieve the desired viewing angle. Loosening the tilt
stopper screw (using a PH000 screwdriver) can make
this process easier.
Warning: Do not tilt the camera beyond 70 degrees.
10
Re-attach the dome cover using the provided
torx wrench.
Warning: Ensure that the light sensor (see camera
diagram) is visible when the camera cover is attached.
If the light sensor is shielded by the cover, the camera
will always be in night mode.
11
Remove the protective film from the dome cover.
Gimbal
❽
❾
70° Max
Template Sheet
