2
ADC-V821 Installation Guide
ADC-V821 Installation Guide
3
Add the Camera to an
Alarm.com Account
Complete these steps prior to installing the camera
in its final location:
1
Connect the camera to the router via an Ethernet cable
2
If the Ethernet connection does not provide power,
connect the camera to an AC power adapter and plug
the adapter into a non-switched outlet.
3
Wait 2 minutes for the camera to connect
to the Internet.
4
Add the device by either selecting the account in
MobileTech OR by using a web browser and entering the
following URL: www.alarm.com/addcamera
5
Select the camera from the video list or type in its MAC
address to begin adding the camera. The camera’s MAC
address is located on the base of the camera.
6
Follow the on-screen instructions to finish adding the
camera. You may configure camera settings from the
Customer Website.
You can now power down the camera and install it in its
final location using the included hardware.
