19
2.5 Control Panel
The control panel is specially designed considering both easy setting of
the boiler with only two knobs and a reset button on it and an aesthetic
outside appearance with a surrounding blue LED lightening along the
panel border. This lightening feature is arranged to be ON by default,
while there is flame in the boiler. This property can also be rearranged
according to customers liking so that the LED light can be ON or OFF
continuously all the time.
Warning!:
If LCD light is ON, LED light will
be OFF. They do not give light si-
multaneously. During setting up of
the DHW or CH temperatures with
control panel knobs, LCD panel
will automatically starts emitting
light and LEDs will be OFF. LED
Figure 4 Control Panel Appearance
light will start to give light again 5 seconds after setting of the control
panel with knobs, according to the relevant parameter input described
above.
Figure 5 DHW Knob
2.5.1 ON/OFF and Domestic Hot Water Control Knob
This feature allows the user to ON / OFF the boiler and set the desired
temperature for the domestic hot water. When the blue pin on DHW knob
indicates the gap under the temperature legend ‘1’, boiler is OFF and not
only the central heating mode but also the domestic hot water mode is
OFF position.
When the indicator knob posi-
tion passes over the legend ‘1’,
domestic hot water mode is ON.
From number 1 to 7 domestic hot
water temperature can be adjust-
ed. Turning clockwise increases
the set temperature.