Technical Reference Manual for
OMNI-A0092
Author
C. Vale
Creation Date
2010-04-29
Product
OMNI-A0092
Revision Date
Name:OMNI-A0092_TRM.doc
Company Confidential
Version 1.0
Page 15 of 55
2.2.1.1
Installation of pressure hose
The pressure hose used to actuate the mast is pre-installed on the main antenna assembly. The
hose should be routed through the hole in the base plate provided near the AMU and to the
compressor, where it should be attached to the air pressure nozzle. Care should be taken to
ensure that the hose is not pinched.
2.2.1.2
Installation of power to compressor
Power is provided to the compressor unit via the power connector provided. The table below
provides the required wiring of the power cable (not provided) to the connector.
Figure 10: Power connector with cable attached (not provided)
Figure 11: Remote control with cable
