Alamo INTERSTATER, Operator'S Manual

Page: 137 / 186

OPERATION
INTERSTATER 03/09 Operation Section 4-27
© 2009 Alamo Group Inc.
OPERA
T
ION
10.4 Driving the Tractor and Implements
Start off driving at a slow speed and gradually
increase your speed while maintaining complete
control of the tractor and units. Moving slowly at
first will also prevent the tractor from rearing up
and loss of steering control. The tractor should
never be operated at speeds that cannot be
safely handled or which will prevent the operator
from stopping quickly during an emergency. If the
power steering or engine ceases operating, stop
the tractor immediately as the tractor will be
difficult to control.
Drive the tractor with the 3-Point lift arms in the
raised position and lock the control lever in the
transport detent position to prevent damage to
the mower driveline and tongue when turning.
Perform turns with the tractor and units at slow
speeds to determine how the tractor with an
attached blade or rake handles a turn. Determine
the safe speed to maintain proper control of the
tractor when making turns. When turning with a
towed implement, the overall working length of
the unit is increased. Allow additional clearance
for the units when turning.
To avoid overturns, drive the tractor with care and
at safe speeds, especially when operating over
rough ground, crossing ditches or slopes, and
turning corners. Tractor wheel tread spacing
should be increased when working on inclines or
rough ground to reduce the possibility of tipping.
Use extreme caution when operating on steep
slopes. Keep the tractor in a low gear when going
downhill. DO NOT coast or free-wheel downhill.
OPS-F- 0009